Obituary - Vladimír Zvarík

Most read articles by the same author(s)

• Peter Prislupčák, Tibor Kvačkaj, Jana Bidulská, Stanislav Németh, Mária Demčáková, Roman Gburík, Vladimír Kundracík, EFFECT OF RETAINED AUSTENITE ON PLASTIC CHARACTERISTICS OF DUAL PHASE STEELS , Acta Metallurgica Slovaca: Vol. 28 No. 4 (2022): Acta Metallurgica Slovaca
• Tibor Kvackaj, Ivo Demjan, Peter Bella, Róbert Kočiško, Patrik Petroušek, Alica Fedorikova, Jana Bidulská, Miloslav Lupták, Petr Jandačka, Marcela Lascsáková, THE INFLUENCE OF ANNEALING TEMPERATURE ON THE MAGNETIC PROPERTIES OF CRYO-ROLLED NON-ORIENTED ELECTRICAL STEEL , Acta Metallurgica Slovaca: Vol. 28 No. 2 (2022): Acta Metallurgica Slovaca
• Patrik PETROUSEK , Tibor KVACKAJ , Róbert KOCISKO , Jana BIDULSKA , Miloslav LUPTAK, Diego MANFREDI , Marco ACTIS GRANDE, Robert Bidulsky, Influence of cryorolling on properties of L-PBF 316l stainless steel tested at 298K and 77K , Acta Metallurgica Slovaca: Vol. 25 No. 4 (2019): Volume 25, No 4, 2019
• Robert Bidulsky, Jana Bidulská, Tibor Kvačkaj, Marco Actis Grande, Case study of advanced processed OFHC copper by dry sliding wear test , Acta Metallurgica Slovaca: Vol. 29 No. 1 (2023): Acta Metallurgica Slovaca
• Dušan Šimčák, Tibor Kvačkaj, Róbert Kočiško, Róbert Bidulský, Ján Kepič, Viktor Puchý, EVALUATION OF HIGHT PURITY ALUMINIUM AFTER ASYMMETRIC ROLLING AT AMBIENT AND CRYOGENIC TEMPERATURES , Acta Metallurgica Slovaca: Vol. 23 No. 2 (2017): Volume 23, no. 2, 2017
• Peter Prislupčák, Tibor Kvačkaj, Jana Bidulská, Pavol Záhumenský, Viera Homolová, Peter Zimovčák, AUSTENITE – FERRITE TRANSFORMATION TEMPERATURES OF C MN AL HSLA STEEL , Acta Metallurgica Slovaca: Vol. 27 No. 4 (2021): Acta Metallurgica Slovaca
• Tibor Kvačkaj, Róbert Bidulský, Andrea Kováčová, Jana Ileninová, Jana Bidulská, ANALYSIS OF METALLIC MATERIALS FOR ITER WITH THE EMPHASIS ON COPPER ALLOYS , Acta Metallurgica Slovaca: Vol. 20 No. 4 (2014): Volume 20, no. 4, 2014
• Patrik Petroušek, Tibor Kvačkaj, Róbert Kočiško, Róbert Bidulský, Jana Bidulská, Alica Fedoriková, Tomáš Hlava, EVALUATION OF FORMABILITY OF THIN SHEETS BASED ON Al-Mg-Si FOR AUTOMOTIVE INDUSTRY , Acta Metallurgica Slovaca: Vol. 21 No. 3 (2015): Volume 21, no. 3, 2015
• Robert Bidulsky, Ľuboš Kaščák, Zbigniew Brytan, Jana Bidulská, Miloš Dekrét, Martin Domovec, Tibor Kvačkaj, Three decades of research excellence , Acta Metallurgica Slovaca: Vol. 31 No. 1 (2025): Acta Metallurgica Slovaca
• Michal Besterci, Ferdinand Dobeš, Tibor Kvačkaj, Katarína Sülleiová, Beata Ballóková, Oksana Velgosová, HIGH TEMPERATURE MECHANICAL PROPERTIES OF Al-Al4C3 COMPOSITE PRODUCED BY MECHANICAL ALLOYING , Acta Metallurgica Slovaca: Vol. 20 No. 3 (2014): Volume 20, no. 3, 2014