Vol. 32 No. 3 (2026): Acta Metallurgica Slovaca

Published: 2026-09-28

Research papers

Production of manganese-bearing ligatures from iron–manganese ore beneficiation tailings by ore-thermal smelting

Alibek Baisanov, Abu Amenov, Nina Vorobkalo, Amir Makishev, Symbat Sharieva, Zhanna Ibrakhimova

168-173
- pdf
One-stage leaching of osmium-rhenium containing lead cake using various oxidizing agents

Evgeny Alexandrovich Mazulevsky , Nazira Seidakhmetova, Tatyana Vladimirovna Kovzalenko, Bagzhan Gapparalyuly Ondiris

174-180
- pdf
Effect of FeSi, FeB and FeSiB Ferroalloy Modifiers on the Microstructure and Mechanical Properties of High-Strength Cast Iron

Ruslan Sultangaziev, Madina Abdildina, Alexey Orlov

181-184
- pdf
Heap-borehole bio-leaching of precious and non-ferrous metals under continental climate conditions: a perforated-tube thermal activation approach

Aigul Koizhanova, Bagdaulet Kenzhaliyev, Bekzat Abdikerim, David Magomedov , Roza Zhumagulova

185-189
- pdf
Probabilistic modeling and industrial validation of ore grinding in drum mills using a physically motivated activation factor

Gulnara Katkeeva, Astra Makasheva, Vitaliy Malyshev, Natalya Lu, Gulnazira Shaikhova, Armat Zhakan

190-198
- pdf
Microstructural investigation and mechanical performance of Al–Si casting alloys modified with titanium

Sarvar Tursunbaev, Nigora Rizaeva, Umidjon Mardonov, Salima Xashimova, Nuritdin Tadjiev, Javlon Bekpulatov, Abdulaziz Yusupov, Bekzod Yusupov, Furkat Odilov, Gafur Atajanov, Fatxulla Abdullaev

199-204
- pdf
Sequential biodegradation and sodium percarbonate oxidation for the removal of free cyanide from the liquid phase of gold plant tailings

Shynar Saulebekkyzy, Ainur Berkinbayeva, Bagdaulet Kenzhaliyev, Arailym Mukangaliyeva, Gulnara Moldabayeva, Nazerke Tolegenova

205-211
- pdf
The insights to the phase transformation kinetics of middle-carbon Mn-Si high-strength steels: Effect of manganese content

Vasily Efremenko, Yuliia Chabak, Ivan Petrišinec, Alexey Efremenko, Maria Podobova, Mikhailo Brykov

220-227
- pdf
Valorization of titanium production waste for selective Fe–Ti separation and concentrate production from titanomagnetite: response-surface optimization of chloride-assisted reduction roasting

Galymzhan Maldybayev, Argyn Korabayev, Rustam Sharipov, Ingkar Temirgali , Mehmed Deniz Turan, Omirserik Baigenzhenov

228-240
- pdf
Thermodynamic mechanism of non-metallic inclusions modification in recycled low-alloyed cast steel using CaCO₃–CaSiO₃ composite mineral fluxes

Nozimjon Kholmirzaev, Nodir Turakhodjaev, Jamshidbek Khasanov, Abdujalol Bektemirov, Nosir Saidmakhamadov, Zokirjon Nurdinov, Shovkat Tursunov, Shakhzodjon Turdiev, Rustam Parpiev, Farkhad Maksumov, Dilshod Sartibayev, Kamoliddin Khasanov

241-250
- pdf
Production of High-Temperature and High-Resistivity Semicoke from Coals of “Shubarkol Komir” JSC

Aristotel Issagulov, Bekarys Salkynbayev, Dastan Aubakirov, Renat Zhdanov

251-255
- pdf
Investigation of the Properties of Shell Molds for Investment Casting quasi-high-entropy alloys

Svetlana Kvon, Aizhan Abildina, Vitaliy Kulikov

256-261
- pdf
The development of CR-SI-LA-MN alloy steels with dissipative properties and their surface modification by deposition of nanostructured wear-resistant TiN-Ni coatings.

Rysbubi Abuova , Gulziya Burshukova, Yerik Serikuly

262-266
- pdf

Reviews

Gold recovery from primary and secondary raw materials: leaching, matrix effects and selective separation

Ainur Berkinbayeva, Bagdaulet Kenzhaliyev, Kenzhegali Smailov, Diana Karim

212-219
- pdf

Vol. 32 No. 3 (2026): Acta Metallurgica Slovaca

Research papers

Production of manganese-bearing ligatures from iron–manganese ore beneficiation tailings by ore-thermal smelting

One-stage leaching of osmium-rhenium containing lead cake using various oxidizing agents

Effect of FeSi, FeB and FeSiB Ferroalloy Modifiers on the Microstructure and Mechanical Properties of High-Strength Cast Iron

Heap-borehole bio-leaching of precious and non-ferrous metals under continental climate conditions: a perforated-tube thermal activation approach

Probabilistic modeling and industrial validation of ore grinding in drum mills using a physically motivated activation factor

Microstructural investigation and mechanical performance of Al–Si casting alloys modified with titanium

Sequential biodegradation and sodium percarbonate oxidation for the removal of free cyanide from the liquid phase of gold plant tailings

The insights to the phase transformation kinetics of middle-carbon Mn-Si high-strength steels: Effect of manganese content

Valorization of titanium production waste for selective Fe–Ti separation and concentrate production from titanomagnetite: response-surface optimization of chloride-assisted reduction roasting

Thermodynamic mechanism of non-metallic inclusions modification in recycled low-alloyed cast steel using CaCO₃–CaSiO₃ composite mineral fluxes

Production of High-Temperature and High-Resistivity Semicoke from Coals of “Shubarkol Komir” JSC

Investigation of the Properties of Shell Molds for Investment Casting quasi-high-entropy alloys

The development of CR-SI-LA-MN alloy steels with dissipative properties and their surface modification by deposition of nanostructured wear-resistant TiN-Ni coatings.

Reviews

Gold recovery from primary and secondary raw materials: leaching, matrix effects and selective separation

Information

Make a Submission